Steel Buildings Barrie Ontario: Prefab Garages, Workshops and Warehouses
Pre-engineered steel buildings designed for Barrie’s heavy snow loads and cold winters — with engineer-stamped drawings and a custom quote within 24 hours.
- Engineered for Barrie’s 2.5 kPa ground snow load
- Stamped drawings to support your City of Barrie permit
- CSA A660 certified steel, Canadian made
Get my free Barrie quote →See Simcoe County projects
Get Your Barrie Quote
Share your size, location and use — we’ll send a custom quote within 24 hours.
Steel Buildings for Sale in Barrie & Simcoe County
Tower Steel Buildings supplies pre-engineered steel and metal buildings across Barrie, Simcoe County and Georgian Bay: residential garages and workshops, storage buildings, and commercial and industrial buildings.
Barrie’s design snow load is nearly three times Toronto’s, and the Georgian Bay shore is higher still. Every Tower building is engineered for the loads at your exact site, then supplied as a kit with delivery or as a turnkey project with foundation and erection.
- Local project experience
- Engineer-stamped drawings
- Kit only or full service
Steel Garage & Workshop Kits for Sale in Barrie
Start with a popular size. Each kit is engineered for Barrie’s snow load and quoted for your project.
Browse by type: garages · workshops · truck garages · farm buildings · warehouses · commercial · all kits
Our Services in Barrie Ontario
Choose only the parts you need, or let one company handle the whole building. Your quote lists each service separately.
Engineering
Building and foundation drawings stamped by a licensed Ontario engineer, designed for Barrie’s snow load and frost conditions.
Kit & delivery
CSA A660 certified steel from our own Ontario factory, delivered to your site in Barrie or anywhere in Simcoe County.
Foundation
Concrete foundation coordinated with your building’s anchor bolt layout and loads.
Erection
Erection crews assemble the frame, roof and walls following the approved drawings.
Projects Completed in Barrie Ontario
Tower Steel Buildings has supplied steel buildings across Barrie, Simcoe County and Georgina, from a 24 × 24 building in Midland to an 80 × 80 storage building in Georgina.
40 × 30 Steel Garage, Full Turnkey
About 14 km from Barrie. Tower Steel Buildings took this garage from engineering and manufacturing through erection, with the frame going up in winter. The result is 1,200 sq ft of garage space.
- 40 × 30 × 12 ftSize
- 1,200 sq ftFloor area
- Full turnkeyEngineering to erection
80 × 80 Steel Storage Building, Full Turnkey
About 34 km east of Barrie. This storage building gives the owner 6,400 sq ft of clear-span covered space, delivered as a full turnkey project from engineering through erection.
- 80 × 80 × 16 ftSize
- 6,400 sq ftFloor area
- Full turnkeyEngineering to erection
Sizes are width × length (× eave height where recorded), in feet. Distances are approximate, from central Barrie. Customer names and site addresses are withheld.
Tell us your size, location and use. We will send a custom quote within 24 hours.
Barrie Snow Loads for Steel Buildings
The Ontario Building Code gives Barrie a ground snow load of 2.5 kPa, nearly three times Toronto’s 0.9 kPa, with a −24 °C January design temperature.
The Georgian Bay snowbelt goes higher: 2.7 kPa in Midland and Collingwood and 2.8 kPa in Penetanguishene. A building priced for the GTA is not automatically right for Simcoe County, so every Tower building is engineered for the loads at its exact site.
| Location | Snow load Ss | Wind 1/50 | Jan. design temp |
|---|---|---|---|
| Barrie | 2.5 kPa | 0.36 kPa | −24 °C |
| Orillia | 2.4 kPa | 0.36 kPa | −25 °C |
| Midland | 2.7 kPa | 0.39 kPa | −24 °C |
| Penetanguishene | 2.8 kPa | 0.39 kPa | −24 °C |
| Collingwood | 2.7 kPa | 0.39 kPa | −21 °C |
| Bradford | 2.1 kPa | 0.36 kPa | −23 °C |
| Alliston | 2.0 kPa | 0.36 kPa | −23 °C |
| Toronto, for comparison | 0.9 kPa | 0.44 kPa | −18 °C |
Source: Ontario Building Code, SB-1 Table 2, Climatic Design Data. Ground snow load is not the same as roof design load; your engineer calculates the final loads for your site.
Permits and Building Process in Barrie Ontario
In Barrie, a garage or other accessory structure larger than 10 m² (108 sq ft) needs a building permit. Sheds need one over 15 m² (162 sq ft) or more than one storey.
Check zoning first
Confirm setbacks and lot coverage under section 5.3 of Barrie’s Zoning By-law, and check whether a conservation authority permit is needed for your lot.
Prepare the drawings
Applications need legible, scaled drawings that show compliance with the Building Code and Zoning By-law. Tower provides engineer-stamped building and foundation drawings.
Apply online through APLI
Submit and pay through the City’s APLI online portal, which also saves your application so you can finish it later.
Dig safely & inspect
Contact Ontario One Call before digging the foundation, and request your building inspections through APLI.
Based on the City of Barrie’s residential building permits page. Townships in Simcoe County have their own rules. Confirm current requirements before you apply, or see our Ontario permit guide.
Price Range for Barrie Steel Buildings
For early planning, these are our current Ontario ranges for the steel building package. Foundation, erection and site work are extra. Barrie’s higher snow load can add steel, so a site-specific quote matters here.
Larger commercial, industrial and farm buildings.
Size starts to bring the cost per square foot down.
Smaller buildings cost more per square foot.
Your price depends on size, height, snow and wind loads, doors, insulation, finishes, foundation and delivery. Read the Ontario steel building cost guide or get a project-specific quote.
Steel Buildings Across Barrie & Simcoe County
We supply steel buildings across Barrie, Simcoe County and Georgian Bay. Places marked with a dot have Tower projects.
- Barrie
- Midhurst
- Oro-Medonte
- Springwater
- Phelpston
- Wasaga Beach
- Orillia
- Georgina
- Victoria Harbour
- Duntroon
- Pefferlaw
- Port McNicoll
- Cumberland Beach
- Collingwood
- Midland
- Severn
- Brechin
- Innisfil
- Essa
- Angus
- Bradford
- Penetanguishene
- Elmvale
Part of our steel buildings in Ontario service area.
What Our Clients Say
Trusted by Customers in Barrie & Across Canada
Frequently Asked Questions
Barrie Steel Building FAQ
Have a project-specific question? The fastest answer is often a free quote request.
1. Do I need a permit for a steel garage in Barrie?
Yes, if it is larger than 10 m² (108 sq ft). The City of Barrie requires a building permit for garages and other accessory structures over that size, and for sheds over 15 m² (162 sq ft) or more than one storey. You can apply online through the City’s APLI portal.
2. What is the cost per square foot for steel buildings in Barrie?
For early planning, our Ontario ranges for the steel building package are about $30–$45 per sq ft for small garages and workshops, $25–$35 for mid-size buildings and $20–$30 for large buildings. Foundation, erection and site work are extra, and Barrie’s snow load can add steel. See our Ontario cost guide.
3. How long does installation take?
It depends on the building size, permit timing and the scope you choose. Your quote lists what is included and the expected schedule. Our Oro-Medonte garage frame went up in winter, so the season does not have to stop your project.
4. Which insulation is best for Barrie’s climate?
Insulated metal panels or fibreglass systems with a vapour barrier are common choices for heated garages and workshops, and they help control condensation in cold weather. Insulation options are listed in your quote.
5. Do your packages include foundation drawings?
Foundation drawings are prepared to match your building design and its loads, including Barrie’s snow load. Your quote lists exactly which drawings and services are included.
6. Can I expand my building later?
Yes, if you plan for it. Ask for an expandable end wall in your design so a future extension is easier to add. Your engineer designs the building with that option in mind.
7. Do you work with local contractors?
Yes. You can buy the kit and use your own local contractor for the foundation and erection, or add our foundation and erection services. Several of our Simcoe County projects, including buildings in Barrie, Springwater and Wasaga Beach, were full service.
Ready to Start Your Barrie Project?
Share your size, location and how you will use the building. We will prepare a project-specific quote engineered for your site in Barrie or Simcoe County.